Commissioning pH 7310
12 ba75929e02 10/2011
3.3.2 Connecting the power pack
3.3.3 Mounting the stand
The stand base can be mounted at the right side of the meter.
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see
section 13 TECH-
NICAL DATA, page 62).
CAUTION
Use original power packs only (see section 13 TECHNICAL DATA,
page 62).
1. Connect the plug of the power pack to the socket for the power pack on
the pH
7310.
2. Connect the original power pack to an easily accessible power outlet.
To Next Page
Loading...
