wtw pH 7310 - Example 1 on Navigation: Setting the Language

Operation pH 7310
18 ba75929e02 10/2011
 Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <ENTER>.
Example: Display the Calibration record function.
 Messages
Information is marked by the i symbol. It cannot be selected. Example:
4.4.5 Example 1 on navigation: Setting the language
1. Press the <On/Off> key.
The measured value display appears.
The instrument is in the measuring mode.
Language: English
Beep
: Off
Illumination: On
Contrast: 50 %
Switchoff time
: 1 h
General
01.07.2011
08:00
Back
Calibration record
Calibration data storage
Buffer: TEC
One point calibration
: Yes
Calibration interval: 7 d
Unit for slope: mV/pH
pH
01.07.2011
08:00
Back
Calibration record
Calibration storage
Buffer
: TEC
One point calibration: Yes
Calibration interval
: 7 d
Unit for slope
: mV/pH
i 2.00 4.01 7.00 10.01
pH
01.07.2011
08:00
Back