What to do if my X-Rite Macbeth Lighting SpectraLight QC Lighting Equipment is not responding?
If your X-Rite Lighting Equipment is not responding, there are several things you can check: * Ensure it's not in low power mode by pressing a switch on the front display panel. * Verify the AC plug is securely connected. * Try switching the main power switch off for 5 seconds and then back on.
Why is my X-Rite Lighting Equipment remote control not working?
If the remote control for your X-Rite Lighting Equipment isn't working, the battery might be bad. Try replacing the battery. Also, the address code assigned to the luminaire might be wrong.
What to do if daisy chained luminaires are not working with X-Rite Macbeth Lighting SpectraLight QC?
If daisy chained luminaires are not working with your X-Rite Lighting Equipment, check all the coupling cables and verify the connections. Also, try restarting the master control (first device or control box).
General| Brand | X-Rite |
|---|---|
| Model | Macbeth Lighting SpectraLight QC |
| Category | Lighting Equipment |
| Language | English |
Overview of the SpectraLight QC's key features, including light sources and other functionalities.
Instructions for unpacking the SpectraLight QC system and verifying contents.
Guidelines for optimal placement of the SpectraLight QC for accurate color evaluation.
Steps to assemble the viewing booth for the SpectraLight QC system.
Procedure for installing the SpectraLight QC luminaire into the viewing booth.
Steps to turn on the SpectraLight QC unit and initial system boot-up process.
Explanation of how to use the switches and navigate the SpectraLight QC display interface.
Hardware and software requirements for installing the SpectraLight QC utility.
Step-by-step instructions for installing the SpectraLight QC software utility.
Setting up owner-specific information, company, location, and remarks.
Configuring primary system settings like lamp modes, dim reference, and filters.
Procedure to reset lamp hours and cycles after lamp replacement.
Setting End-Of-Life parameters for lamps to receive notifications.
Creating and managing operator profiles for tracking usage and reports.
Customizing switch assignments and auto-sequence settings for profiles.
Adjusting preset lux values for fluorescent lamps.
Enabling or disabling switches on the SpectraLight QC main menu screens.
Rearranging switch order for menu screens and auto-sequencing.
Programming a sequence of light sources for a specified duration.
Entering and editing operator information for reports and tracking.
Setting the system's date and time, essential for lamp operation.
Viewing system information like hardware/firmware versions and log files.
Assigning luminaires to specific groups within the daisy chain configuration.
How to select and control different light sources available on the SpectraLight QC.
Programming and running automatic sequences of light sources.
Step-by-step guide to program auto sequences for light sources.
How to execute a programmed auto sequence of light sources.
Adjusting the brightness and contrast of the SpectraLight QC display panel.
Viewing sensor data, primarily for service and diagnostics.
Changing the operating language of the SpectraLight QC unit.
Generating and viewing system and conformance reports using the application.
Example of a system report showing lamp statistics and dimmer characteristics.
Example of a conformance report detailing company, operator, and profile information.
Pairing the remote control with the unit using address codes and dipswitch settings.
Steps for installing and connecting the optional control box.
Contact information and procedures for X-Rite technical and customer support.
Instructions for properly packaging the luminaire for return or service.
Procedures for general maintenance, including cleaning.
Step-by-step guide for cleaning the diffuser glass of the luminaire.
Instructions for cleaning the daylight filters and their reflectors.
Cleaning fluorescent and halogen lamps and their reflectors.
Final steps to close the diffuser after cleaning or maintenance.
Instructions for replacing tungsten-halogen lamps, including daylight lamps.
Instructions for replacing fluorescent lamps.
Procedure for replacing the fuse in the SpectraLight QC unit.
Explains screen messages, error conditions, and user interactions.
Solutions for when the SpectraLight QC unit does not respond to commands or power.
Troubleshooting steps for lamps that are not illuminating or functioning correctly.
Solutions for issues with the remote control's functionality.
Troubleshooting steps for problems with daisy-chained luminaires.
Physical dimensions of the SpectraLight QC overhead luminaire and viewing booth.
Weight specifications for the SpectraLight QC luminaire and viewing booth.
Electrical requirements, power, and fuse specifications for the SpectraLight QC.
Details on lamps, daylight filters, and attenuators used in the SpectraLight QC.
Information on safety certifications and compliance standards for the SpectraLight QC.
Operating and storage environmental conditions for the SpectraLight QC.
List of available replacement lamps, including part numbers and descriptions.
List of optional accessories such as cables, control boxes, and viewing booths.
To Next Page
