XCT80 Truck Crane Operation Manual
6-10
Two seats are equipped in the cab in
the left and right sides, and the manipulation
pieces for the seats are mounted symmetrically.
The seat height adjustment amount is 60mm,
front and back adjustment distance is 170mm,
and backrest angle adjustment range is 120°
(specifically determined according to actual
situation of the cab). Stroke of the seat damping
device can be steplessly adjusted according to
body weight (40~130kg), with the maximum
stroke of 50mm. Headrest height adjustment
amount is 40mm.
Th e s ea t a dj ust me nt metho ds are a s
follows:
1)Headrest height lock: open headrest
height locking switch, pull out or insert the
headrest to the appropriate location by hand,
and release the lock switch to complete the
adjustment.
2)Front and back adjustment: gently
upward lift the seat front and back adjustment
handle 3, push the seat front and back to the
ideal position, and put down the handle to lock
automatically.
3)Backrest angle adjustment: pull the
backrest angle adjustment handle 4 to turn
the backrest forward and backward. When the
handle is released, you can lock the backrest in
the specified location.
4)Stiffness adjustment: rotate damping
stiffness adjustment handle 2 according to
In front and back adjustment and
backrest angle adjustment, you should pull
up the handle to the place, and lock after
adjustment. After adjustment, the handles
should return in place to ensure that the lock
of the various parts is reliable.
The components and functions of lower crane portion
Chapter 6
the driver's own body weight until you feel
comfortable. Clockwise rotation of the load
handle is for carrying weight increase, otherwise
decrease.
5)Height adjustment: Pull up cushions
front height adjustment handle 6, the front part
of the seat cushion automatically pops up, and
pull up cushions rear height adjustment handle
5, the rear part of the seat cushion automatically
pops up. When pressed down, either separately
or simultaneously pull up handle 5 and 6, press
down forcibly, and then release the front and
rear handles to fix the seat cushion position.
To Next Page
Loading...
