10. Grasp the amber-gold colored casings on the new charge corotron and pull towards
the front of the machine until you hear a clicking noise to indicate the charge corotron
is in place.
11. Push in the drum cartridge drawer completely.
12. Return the Release Handle to its original position.
13. Return the R1-R4 handle to the original position and close the front door/cover.
14. Insert the used charge corotron into an empty container for recycling.
Replacing the fuser
Note
Power off the machine and allow 5-10 minutes for the fuser to cool down before
performing this procedure. Always observe the warning labels inside the machine.
1. Open the front door/cover.
Xerox
®
770 Digital Color Press
9-20
User Guide
Maintenance
To Next Page
Loading...
