2. Open the Right Cover on the finisher.
3. Move the levers 3b and 3d; remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the levers 3b and 3d to their original positions.
5. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Paper jams at lever 3e and knob 3c
1. Make sure that the machine has stopped printing.
16-19
Xerox
®
770 Digital Color Press
User Guide
Standard/Booklet Maker Finisher
To Next Page
Loading...
