4. Hold the positions as indicated by the arrow and remove the staple cartridge from
the unit.
5. Push a new staple cartridge into the unit.
6. Reinstall the cartridge unit to its original position in the finisher.
7. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Replace the booklet staple cartridge
In addition to the standard stapler, the Booklet Maker Finisher is equipped with a booklet
stapler. When this booklet stapler needs to be replaced, a message appears on the UI.
1. Make sure that the machine has stopped printing.
Xerox
®
770 Digital Color Press
16-8
User Guide
Standard/Booklet Maker Finisher
To Next Page
Loading...
