Paper jams at 2c, 2e, 2f, and 2d
1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.
3. Pull out the folder output tray ( 2d), swing lever 2e/2f to the right, and remove the
jammed paper.
Note
If paper is torn, check inside the machine and remove it.
4. If you cannot remove the paper, return the lever 2e/2f to its original position. Swing
the lever 2e/2f, turn the knob 2c to the right, and remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
16-25
Xerox
®
770 Digital Color Press
User Guide
Standard/Booklet Maker Finisher
To Next Page
Loading...
