SquareFold Trimmer Module
The SquareFold Trimmer Module is an optional finishing device that is used in conjunction
with the Light Production C Finisher with Booklet Maker.
Note
The SquareFold Trimmer Module is shown here with the required Interface Module and
the required Booklet Maker Finisher (and optional C/Z Folder).
Related Topics:
SquareFold Trimmer Module
Third-party finishing devices
Additional third-party, Document Finishing Architecture (DFA) devices are also available
for your machine. Information on these DFA devices can be obtained by contacting your
Xerox sales representative.
Power on/off
Power on
After turning the power on, the machine takes approximately 3 minutes to warm up
before you can start making copies.
1. Open the cover.
1-11
Xerox
®
770 Digital Color Press
User Guide
Product overview
To Next Page
Loading...
