Xerox 770 User Manual

003-753
When scanning a mixed size document using the 2 sided simultaneous scan feature
with 300, 400, or 600dpi, an error occurs.
Decrease [Scan Resolution] to [200dpi] or less, and rescan.
003-754
An error occurred in the document feeder.
Reprocess the job.
003-755
An error occurred in the document feeder.
Reprocess the job.
003-757
When scanning a mixed size document using the 2 sided simultaneous scan feature
with400, or 600dpi, an error occurs.
Decrease [Scan Resolution] to [300dpi] or less, and rescan.
003-760
An incompatible combination of features are specified in the document scan conditions.
Check the selected options.
003-761
The paper size of the tray selected for auto tray is different from the paper size of the
tray selected for Auto Repeat.
Change the paper size for the tray, or change the [Paper Type Priority] settings.
003-763
An error occurred when reading the Gradation Adjustment Chart.
Place the Adjustment Chart properly on the document glass.
003-795
When enlarging/reducing a scanned document to the specified paper size, the
reduction/enlargement ratio value exceeds the allowed range.
Take one of the following actions:
• Manually enter a reduction/enlargement ratio
• Change the paper size.
005-274
An error occurred in the document feeder.
Power-cycle the machine. Contact your Xerox Customer Support Center.
10-13
Xerox
®
770 Digital Color Press
User Guide
Problem solving

Xerox 770 Specifications

General

Brand	Xerox
Model	770
Category	Office Equipment
Language	English