Xerox 770 User Manual

116-713
Job was divided and printed due to insufficient disk space.
Remove unnecessary data from the hard disk to increase free disk space.
116-780
There is a problem with the document attached to the received mail.
Check the attached document.
123-400
A malfunction occurred in the machine.
Power-cycle the machine. If the machine is not improved by performing the relevant
remedy, contact your Xerox Customer Support Center.
124-709
The number of pages exceeds the number of pages that can be stapled.
Decrease the number of pages, or cancel the stapling settings, then try to print again.
127-210
A malfunction occurred in the machine.
Power-cycle the machine. If the machine is not improved by performing the relevant
remedy, contact your Xerox Customer Support Center.
Detected a communication error between the printer and the controller.
Remove and reinsert the cable connection between the printer and the controller. Power
off and on both the printer and the controller. If the problem persists, call the Customer
Support Center.
127-212
Detected an internal print check error by the controller.
Remove and reinsert the command/video cable between the controller and the printer.
Power off and on both the printer and the controller. If the problem persists, call the
Customer Support Center.
127-213
Detected a mismatch with the software version of the controller.
Contact the Customer Support Center for information and/or instructions to remedy
the problem.
127-220
Detected a communication error of the video system by the controller.
Remove and reinsert the cable connection between the printer and the controller. Power
off and on both the printer and the controller. If the problem persists, call the Customer
Support Center.
Xerox
®
770 Digital Color Press
10-26
User Guide
Problem solving

Xerox 770 Specifications

General

Brand	Xerox
Model	770
Category	Office Equipment
Language	English