Xerox B225

PPoossttSSccrriipptt
Menu item
Description
Print PS Error
• Off*
• On
Print a page that describes the PostScript® error.
Note: When an error occurs, processing of the
job stops, the printer prints an error message,
and the rest of the print job is flushed.
Minimum Line Width
1–30 (2*)
Set the minimum stroke width of any job printed in
1200 dpi.
Lock PS Startup Mode
• Off
• On*
Disable the SysStart file.
Wait Timeout
• Disabled
• Enabled*
Enable the printer to wait for more data before
canceling a print job.
Wait Timeout Time
15–65535 (40*)
Set the time in seconds for the printer to wait for
more data before canceling a print job.
Note: This menu item appears only when
Wait Timeout is enabled.
Note: An asterisk (*) next to a value indicates the factory default setting.
PPCCLL
Menu item
Description
Font Name
[List of available fonts] (Courier*)
Select a font from the specified font source.
Symbol Set
[List of available symbol set] (10U PC-8*)
Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and
numeric characters, punctuation, and special
symbols. Symbol sets support the different
languages or specific programs such as math
symbols for scientific text.
Pitch
0.08–100 (10*)
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed-
space characters in a horizontal inch of type.
134
Xerox
®
B225/B235 Multifunction Printer
User Guide
Use printer menus