Xerox B225

Menu item
Description
– 200 dpi
– 300 dpi*
Contrast
• Best for content*
– 0
– 1
– 2
– 3
– 4
– 5
Specify the contrast of the output.
Background Removal
• Level
• -4 to 4 (0*)
Adjust the amount of background visible on a scanned image.
Scan Edge to Edge
• On
• Off*
Allow edge-to-edge scanning of the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Description
Text Default
5–95 (75*)
Set the quality of text on a scanned image.
Text/Photo Default
5–95 (75*)
Set the quality of text or photo image on a scanned image.
Photo Default
5–95(50*)
Set the quality of a photo image on a scanned image.
Transmission Log
• Print log*
• Do Not Print Log
• Print Only For Error
Print a log for successful FTP scan transmission.
Log Paper Source
Tray [x] (1*)
Specify the paper source for printing FTP logs.
Note: An asterisk (*) next to a value indicates the factory default setting.
156
Xerox
®
B225/B235 Multifunction Printer
User Guide
Use printer menus