adapter plug from the telephone port of the printer if you are connecting to a serial or cascaded
telephone system.
CCoonnnneeccttiinngg tthhee pprriinntteerr ttoo aa nnoonn--RRJJ1111 wwaallll jjaacckk
1. Connect one end of the telephone cable to the line port of the printer.
2. Connect the other end of the cable to the RJ11 adapter, and then connect the adapter to the
wall jack.
3. If you want to connect another device with a non-RJ11 connector to the same wall jack, then
connect it directly to the telephone adapter.
42
Xerox
®
B225/B235 Multifunction Printer
User Guide
Set up, install, and configure
To Next Page
Loading...
