Installing the 2 Tray Module 1. Setting up the DocuColor 2006
Xerox DocuColor 2006 1-5
Setting up the 2 Tray Module
To install the 2 Tray Module, perform the following steps.
WARNING
You will need at least two people to remove it from the carton.
1. Open the 2 Tray Module carton.
2. Remove the styrofoam and the plastic wrap from the top of the 2 Tray
Module.
3. With a person on each side of the box, grasp the crossbars in the
locations indicated by the labels.
0301098a
4. Lift the 2 Tray Module from the box and place it the selected location.
5. Lock the front casters as shown below.
301007B-WO
0
To Next Page
Loading...
