Xerox Copier User Manual

Xerox DocuColor 2006 3-1
Network Setup
The information in this chapter is for the customer only.
For instructions on installing print drivers on user workstations, please
go to the appropriate procedure in this chapter:
• Windows 95/98
• Windows 2000
• Windows NT 4.0
• Macintosh OS 8.X or higher
Installing the Token Ring Network card
The Token Ring Network Kit is required when setting up a closed loop, or
Local Area Network (LAN). Token Ring Networks can be connected to other
networks, in local and remote locations.
You will need a phillips screwdriver to perform this procedure.
CAUTION
• Protect the network card from static electricity by keeping it in the
antistatic bag until you are ready to install it.
• Handle the card by the top or side edges only. Do not touch the card
components or the gold connector edge.
• Avoid placing the card near magnetic devices, such as a PC monitor.
• Avoid exposing the card to direct sunlight, high temperatures, or
humidity.
3

Xerox Copier Specifications

General

Brand	Xerox
Model	Copier
Category	Copier
Language	English