Xerox Copier - Installing the Duplex Tray

Installing the Duplex Tray 1. Setting up the DocuColor 2006
Xerox DocuColor 2006 1-27
Installing the Duplex Tray (optional)
The Duplex Tray enables the DocuColor 2006 to print two-sided output.
1. Open the Duplex Tray box and remove the contents:
• Duplex Tray
• Upper Inverter
• Lower Inverter
• Two Thumb Screws
• Small Connector Cover with cutout
• Special Tool
2. Remove the Duplex Tray from the plastic wrap.
a. Remove the packing from the tray
b. Ensure that all the packing is removed from the tray.
301043b
3. Open Paper Tray 1.
301128A-WO
L
0
301128a