1. Setting up the DocuColor 2006 Printing the Test Page
1-70 Xerox DocuColor 2006
Switching off the power
1. Ensure that the READY message is displayed on the two Control
Panels.
Do not switch off the power if any other message is displayed. There may
be a problem, or if the DocuColor 2006 is networked, it may be receiving
data.
2. Press the 0 on the ON/OFF button on the Scanner only.
301086
The Scanner controls the power for the Printer, therefore it is not necessary
to switch off the power on the Printer.
To Next Page
Loading...
