Adding memory to the Printer 1. Setting up the DocuColor 2006
Xerox DocuColor 2006 1-73
Adding memory to the Printer
You will need a phillips head screwdriver to perform this procedure.
CAUTION
• Protect the memory card from static electricity by keeping it in the anti-
static bag until you are ready to install it.
• Handle the card by the top or side edges only. Do not touch the card
components or the gold connector edge.
• Avoid placing the card near magnetic devices, such as a pc monitor.
• Avoid exposing the card to direct sunlight, high temperatures, or
humidity.
1. Switch OFF the power to the Printer and to the Scanner.
301073A-WO
0
2. Remove the three screws from the upper right-hand side panel of the
Printer.
301083
301186
To Next Page
Loading...
