1. Setting up the DocuColor 2006 Unpacking the Printer
1-16 Xerox DocuColor 2006
11. Close the Front Cover.
301077b
12. If you do not have a 2 Tray Module, go to the next procedure Printer
Installation.
If you installed the Printer on the 2 Tray Module, perform the following
steps:
a. Remove the small cover from the rear of the Printer.
301029A-WO
0
b. Connect the two small connectors from the 2 Tray Module into the
jacks in the Printer.
301030A-WO
0
To Next Page
Loading...
