Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-15
Copy
.
Load the Originals
Select the Interrupt Job Features
z Only those
features relevant
to the machine
configuration will
be available.
3
¾ Remove all staples and paper
clips prior to loading.
¾ Load the originals for the Interrupt
job into the Document Feeder or
load a single original on the
Document Glass.
)
For full instructions on loading
originals refer to “Load the
Originals” starting on page 3-3
4
¾ Basic features available for Copy
jobs are Lighten/Darken, Reduce/
Enlarge, 2 Sided, Collated,
Original Type and Color Original.
)
For information about all the
available Copy features, refer to
“Basic Copy Features” on page
3-6, and “Special Copy
Features” on page 3-10.
¾
Press the feature key required
and using the Navigation Keys,
select the setting required for the
feature. Press [Enter].
Lighten/Darken
Reduce/
Enlarge
Original Type
2 Sided
Color Original
Collated
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
