To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if my Xerox DocuMate 3125 causes out of hard drive space error messages?
If you're getting hard drive space error messages while using the Xerox Scanner, it's likely because you don't have enough free space. The scanner requires a minimum of 350MB of free hard drive space to save the scanned images. Try freeing up space on your hard drive.
Why Xerox DocuMate 3125 won't work after computer idle?
If your Xerox Scanner stops working after your computer has been idle for several hours, it may be due to Windows entering power-saving mode. To resolve this, turn off the scanner and then turn it back on.
Why Xerox Scanner not working after Windows system restore?
If your Xerox Scanner doesn’t function after performing a system restore on Windows XP or Windows Vista, the system restore process may have corrupted some of the driver components. It is recommended that you reinstall your scanner driver.
Why won’t my Xerox Scanner buttons work after scanning with Windows Image Acquisition (WIA)?
If the buttons on your Xerox Scanner don't work after scanning with Windows Image Acquisition (WIA), close the application you were using before attempting to scan with the buttons on the scanner.
What does error code 6 mean for Xerox DocuMate 3125 Scanner?
Error code 6 on the Xerox Scanner means the scanner’s cover is open. Open the scanner then close it again.
How to resolve One Touch issues on Xerox DocuMate 3125 after installing Internet Explorer 7?
If One Touch no longer functions after installing Internet Explorer 7 on Windows XP, this is a known issue. Uninstall Internet Explorer 7 and then reinstall your Xerox scanner driver.
What to do if my Xerox Scanner OCR fails with One Touch?
If you're getting an error message that OCR fails when scanning with One Touch on your Xerox scanner, anti-spyware software that is always running may be interfering with the driver functionality. Temporarily disable or suspend the automatic protection feature during scanning.
Why does my Xerox DocuMate 3125 Scanner produce blank pages with AutoCrop?
If your Xerox Scanner produces blank pages or pages with lines when AutoCrop to Original is selected, the pages were probably scanned in crooked or skewed. Adjust the paper guides on the scanner so pages feed in straight.
What does error code 5 mean for Xerox Scanner?
Error code 5 on the Xerox Scanner indicates multiple paper feed. Open the ADF door and remove the pages from the scanner. If the problem persists, clean the double feed detection sensor.
Why Xerox DocuMate 3125 Scanner AutoCrop gives blank pages?
If you are getting blank pages or pages with lines when AutoCrop to Original is selected on your Xerox Scanner, the pages were probably scanned in crooked or skewed. Adjust the paper guides on the scanner to ensure pages feed in straight.
General| Grayscale levels | 8 |
|---|---|
| Maximum scan area (ADF) | 216 x 965 mm |
| Minimum scan area (ADF) | 51 x 74 mm |
| Cables included | AC, USB |
| Built-in display | No |
| USB port | Yes |
| USB version | 2.0 |
Covers crucial electrical safety information, grounding, and power connection guidelines.
Explains conditions requiring immediate shutdown and how to safely turn off the machine.
Step-by-step instructions for unpacking and assembling the scanner unit.
Guides on how to properly connect the scanner's power supply and cord.
Important considerations and preparations before starting the scanner installation process.
Instructions for installing scanner software and connecting the hardware to the computer.
Detailed steps for installing the necessary scanner driver software.
How to connect the scanner via USB and power it on for the first time.
Guide for installing the One Touch software, essential for scanner button functionality.
Step-by-step guide to customize One Touch button configurations and destinations.
How to use OCR to convert scanned text into editable formats.
Important safety measures to follow when performing maintenance on the scanner.
Instructions on how to safely remove paper jams from the Automatic Document Feeder.
Procedures for cleaning the scanner's internal components for optimal performance.
Common scanner problems and their solutions, including connection and software issues.
