EasyManuals Logo

Xerox DocuMate 3125 User Manual

Xerox DocuMate 3125
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
Xerox DocuMate 3125
User’s Guide
145
Click the drop down menu and select a pre-defined page size from the list. The available page sizes are within the
scanner's range of minimum and maximum item size.
Custom page sizes
Select the measurement units you want to use from the Units list.
If the Page size list does not include the page size for your scanning batch, click in one of the fields below the page
size list. Input the width of the document in the first field, then input the height in the second field. You can input a
maximum of 14 inches in the height field. Please refer to Long Document if your scanner supports page lengths
greater than 14 inches and you want to scan long pages.
You can only specify values within the scanner's minimum and maximum supported item size. Please refer to the
maintenance section of the scanner user's guide for this information.
Long Document
Select Long document to enable support of paper sizes up to the scanner maximum. Note that some of the options
in the scanner interface cannot be used when the page length will be greater than 14 inches. When you select this
option, incompatible options will either be automatically disabled or the setting will simply be discarded while
scanning. For instance, the option Double Feed Detection (DFD) will usually be disabled when Long document is
selected, even if the scanner supports DFD, as the added page length will cause a false double feed.
Document Image Adjustments
These options are in the scanning interface for adjusting how the document appears in the scanned image.
Straighten Image
Select this option to let the scanner automatically determine if a page is skewed, then straighten its image. This
option is only available if the scanner supports this feature.
If you are scanning using an automatic document feeder, and the page is fed through at too great of an angle, the
image may not straighten correctly. In that case, re-scan the page making sure the paper guides are adjusted to the
width of the pages in the input tray so that the pages are pulled straight through the scanner.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox DocuMate 3125 and is the answer not in the manual?

Xerox DocuMate 3125 Specifications

General IconGeneral
Grayscale levels8
Maximum scan area (ADF)216 x 965 mm
Minimum scan area (ADF)51 x 74 mm
Cables includedAC, USB
Built-in displayNo
USB portYes
USB version2.0

Related product manuals