Xerox DocuMate 3125 User Manual

Xerox DocuMate 3125
User’s Guide
183
Uninstalling Your Scanner
To uninstall the Xerox DocuMate 3125 scanner, remove the scanner software and any other scanning software
provided with the scanner.
When uninstalling the scanner driver or One Touch, please leave the scanner's USB cable plugged into the computer.
Unplug the USB cable from the computer after the software uninstall program closes.
Uninstalling the Scanner and One Touch Software
1. On the Windows taskbar, click Start, point to Settings, then click Control Panel.
2. Windows XP: Double-click the Add/Remove Programs icon.
Windows Vista and Windows 7: Double-click the Programs and Features icon.
3. From the list of programs, select Xerox DocuMate 3125 Driver.
Click the Change/Remove or Uninstall button.
4. Click Yes when asked to confirm that you want to remove these software programs.
5. Follow these same steps to select and remove the One Touch software, the Kofax VirtualReScan and the
One Touch ScanSoft OmniPage OCR modules from the installed programs list.
6. The scanner driver and One Touch software is removed from your computer.
7. Unplug the USB cable from the scanner.
8. Close all open windows and restart your computer.
Uninstalling the PaperPort and OmniPage Software
1. On the Windows taskbar, click Start, point to Settings, then click Control Panel.
2. Windows XP: Double-click the Add or Remove Programs icon.
Windows Vista and Windows 7: Double-click the Programs and Features icon.
3. Select PaperPort or OmniPage and click Remove.
4. A message window opens, asking if you are sure you want to remove PaperPort or OmniPage from your
computer. Click Yes.
5. Close all open windows and restart your computer.

Xerox DocuMate 3125 Specifications

General

Grayscale levels	8
Maximum scan area (ADF)	216 x 965 mm
Minimum scan area (ADF)	51 x 74 mm
Cables included	AC, USB
Built-in display	No
USB port	Yes
USB version	2.0