What to do if my Xerox Scanner doesn't reconnect after unplugging the USB?
If the USB cable is disconnected during a scan and the scanner doesn't reconnect when plugged back in, try these steps: * Unplug the power cable from the scanner, and then plug it back in. * Restart your computer.
Why does my Xerox DocuMate 4830 Scanner jam halfway through a scan?
If the paper jams about halfway through the scan, it could be due to multiple items placed on the flatbed glass, which raises the lid slightly. Check the flatbed glass to make sure no items are on it when you scan from the ADF.
Why does AutoCrop on my Xerox Scanner produce blank pages or pages with lines?
If you're getting blank pages or pages with lines when using AutoCrop, the pages were probably scanned in crooked or skewed. Adjust the paper guides on the scanner so pages feed in straight.
Why aren't all pages sent when using 'Create single image files' on my Xerox DocuMate 4830?
When using the "Create single image files" option, not all pages might be sent to the chosen destination because an application can only open a limited number of times. Limit your scan batch to less than 5 pages.
General| Film scanning | - |
|---|---|
| Color scanning | Yes |
| Maximum scan size | 297 x 2997 mm |
| Output color depth | 24 bit |
| ADF scan speed (b/w, A4) | 50 ppm |
| ADF scan speed (color, A4) | 30 ppm |
| Optical scanning resolution | 600 x 600 DPI |
| Duplex ADF scan speed (b/w, A4) | 100 ipm |
| Duplex ADF scan speed (color, A4) | 60 ipm |
| Scanner type | Flatbed & ADF scanner |
| Product color | Blue, Grey |
| Built-in display | No |
| Sensor type | CIS |
| Scan drivers | ISIS, TWAIN, WIA |
| Daily duty cycle (max) | 3000 pages |
| Auto document feeder (ADF) input capacity | 75 sheets |
| Maximum ISO A-series paper size | A3 |
| Auto Document Feeder (ADF) media weight | 75 - 80 g/m² |
| USB version | 2.0 |
| Standard interfaces | USB 2.0 |
| Input voltage | 100-240 V |
| Power supply type | AC |
| Power consumption (standby) | 15 W |
| Power consumption (typical) | 30 W |
| Minimum RAM | 2048 MB |
| Minimum storage drive space | 350 MB |
| Cables included | AC, USB |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 499 mm |
|---|---|
| Width | 581 mm |
| Height | 194 mm |
| Weight | 12000 g |
Provides guidance on safe operation and testing of Xerox products.
Details safety guidelines for operating Xerox equipment, including do's and don'ts.
Covers electrical safety, power supply requirements, and grounding for the scanner.
Outlines procedures for immediate shutdown and when to contact service.
Describes general maintenance rules and what is not permitted.
Lists safety standards and agencies certifying the product.
Provides contact information for safety inquiries in USA and Europe.
Lists all components included with the Xerox DocuMate 4830 scanner.
Specifies the hardware and software needed to operate the scanner.
Details the various user guides and documentation provided with the scanner.
Provides an overview and labeled diagram of the scanner's parts.
Step-by-step instructions for unboxing and preparing the scanner for use.
Guides on how to connect the scanner's power supply and cord.
Important considerations and prerequisites before starting software installation.
Instructions for installing scanner drivers and software from the installation disc.
Explains the process and benefits of registering the scanner online.
Details on how to install extra software applications provided with the scanner.
Guidance on accessing and viewing the scanner and software user guides.
Instructions on preparing and loading documents into the ADF for scanning.
Steps for scanning single items or items not suitable for the ADF.
Overview of different scanning methods like One Touch, TWAIN, and ISIS.
Explains the initial factory settings for One Touch buttons and customization options.
Describes how to customize One Touch button destinations, formats, and configurations.
Details on creating, editing, and managing scan settings profiles.
Explains available file formats (BMP, TIFF, JPG, PDF, TEXT) and their properties.
Guides on scanning documents and saving them directly to a folder or network location.
Instructions on using OCR to convert scanned text into editable formats.
How to initiate scans from various applications using TWAIN or WIA interfaces.
Basic steps for performing a scan using the scanner interface.
Guide on using the preview feature to adjust scan settings before scanning.
Options for configuring basic and advanced document source settings.
Details on main, advanced, and scanner model-specific document settings.
Options for adjusting image quality like brightness, contrast, and despeckle.
How to configure add-on modules and scanner hardware properties.
Information on scanner details, power settings, and driver behavior options.
Steps to access and use the scanner's ISIS driver via QuickScan software.
Essential safety guidelines to follow when servicing the scanner.
Procedure for removing paper jams from the Automatic Document Feeder.
Instructions for routine cleaning of the scanner and ADF components.
Step-by-step guide for replacing the user-replaceable ADF pad.
Instructions on how to replace the scanner's feed roller assembly.
Common problems and their solutions, including scan errors and software issues.
Steps to remove scanner software and related applications.
Technical specifications of the scanner model.
List of common replacement parts with their part numbers.
Information on FCC regulations for the US and EU directives for electromagnetic compatibility.
Details on prohibited reproduction subjects in the United States and Canada.
Guidance on responsible disposal and recycling of the Xerox product.
Information on the scanner's ENERGY STAR qualification and energy efficiency.
To Next Page