40 I-Class
Printer Options (continued)
CUTTER Used to cut media into separate labels.
(The physical presence of a device must be
detected to show the ENABLE/DISABLE
selections.)
ENABLED
Enables cutting.
²DISABLED
Disables cutting.
NOT INSTALLED
No Cutter is detected.
SCANNER Used to check the bar codes on the labels.
(The physical presence of a device must be
detected to show the menu selections.)
NOT INSTALLED
No Scanner is detected.
MODE
Enables bar codes to be read by the
Scanner.
²PICKET FENCE
Reads horizontal bar codes (individual
bars appear like the pickets in a fence) as
the label exits the printer.
DISABLED
Disables the scanner.
BARCODES
Enables the scanner to read the respective
bar code. Also see Appendix B.
þ Note: To maximize throughput and decoding
integrity enable only those symbologies that will
be read.
²CODE 39
IATA
²CODABAR
²INTERLEAVED 2 OF 5
²INDUSTRIAL 2 OF 5
²CODE 93
²CODE 128
²MSI/PLESSEY
²EAN(13/8)
²EAN(13/8)+2
²EAN(13/8)+5
²UPC(A/E)
²UPC(A/E)+2
²UPC(A/E)+5
To Next Page
Loading...
