Xerox I Class User Manual

28 I-Class
3.5.3 Cutting
When equipped with a Cutter, cut labels are dispensed automatically from the
printer. To load media on a cutter equipped printer
ΠEnsure the leading edge of media is clean, straight and firmly attached to the
liner.
• Load media according to Section 3.1, except route the media out through the
Opening of the Cutter Assembly.
+
For label cutting, ensure that the Cutter has been enabled; see Section
4.1.4.

Xerox I Class Specifications

General

Brand	Xerox
Model	I Class
Category	Printer
Language	English