Xerox Phaser 3010 User Manual

Printing
22 Phaser 3010/3040 Printer
User Guide
Loading Paper for Manual 2-Sided Printing
For manual 2-sided printing, the back sides of the pages are printed first in reverse order. For a six-page
document, the pages are printed page 6, page 4, and then page 2. Once the even pages are printed, the
paper is reloaded. The odd pages are printed page 1, page 3, and then page 5.
Note: Load letterhead into the main tray with the printed side down and the top going into
the printer.
1. Load the paper to print the even pages.
Once the even pages have printed, the Error indicator lights and the Ready indicator flashes.
2. Remove the printed pages from the output tray and reload them into the main tray without rotating
or flipping the pages. The unprinted sides of the pages are facing up.
3. Press the button on the control panel.

Xerox Phaser 3010 Specifications

General

Print Technology	Laser
Print Speed	20 ppm
Paper Capacity	150 sheets
Connectivity	USB 2.0
Processor	150 MHz
Memory	64 MB
Output Capacity	100 sheets
Printer Type	Monochrome Laser Printer
Duplex Printing	Manual
Maximum Paper Size	A4
Toner Yield	1, 000 pages
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	30, 000 pages
First Page Out Time	8 seconds
Media Sizes Supported	A4, Letter, Legal
Operating System Compatibility	Windows, Mac