Xerox Phaser 3010 User Manual

Specifications
Phaser 3010/3040 Printer 63
User Guide
Electrical Specifications
Power Supply Voltage and Frequency
Power Supply Voltage
Power Supply Frequency
110–127 VAC +/-10%, (99–140 VAC)
50 Hz +/- 3 Hz
60 Hz +/- 3 Hz
220–240 VAC +/-10%, (198–264 VAC)
50 Hz +/- 3 Hz
60 Hz +/- 3 Hz
Power Consumption
Energy Saver Mode 2 (Sleep): 4 W or less
Energy Saver Mode 1 (Low Power): 8 W or less
Ready: 62 W or less with fuser on
Continuous printing: 380 W or less
This printer does not consume electric power when the power switch is turned off even if the printer is
connected to an AC outlet.
ENERGY STAR Qualified Product
The Phaser 3010 Printer and Phaser 3040 Printer are ENERGY STAR
®
qualified under the
ENERGY STAR Program Requirements for Imaging Equipment.
The ENERGY STAR and ENERGY STAR mark are registered United States trademarks.
The ENERGY STAR Imaging Equipment Program is a team effort between United States,
European Union, and Japanese governments and the office equipment industry to
promote energy-efficient copiers, printers, fax, multifunction printers, personal
computers, and monitors. Reducing product energy consumption helps combat smog,
acid rain, and long-term changes to the climate by decreasing the emissions that result
from generating electricity.
Xerox
®
ENERGY STAR equipment is preset at the factory to switch to Energy Saver Mode after one
minute from the last copy or print.

Xerox Phaser 3010 Specifications

General

Brand	Xerox
Model	Phaser 3010
Category	Printer
Language	English