Troubleshooting
48 Phaser 3010/3040 Printer
User Guide
Streaks appear in the output.
Contact your Xerox representative.
The output has a mottled
appearance.
Verify that the paper is the correct size, type, and weight. If not, change
the paper settings.
Adjust the bias transfer roller. See Adjusting the Bias Transfer Roller on
page 52.
Ghosting appears in the printed
output.
Verify that the paper is the correct size, type, and weight for the printer
and that it is loaded properly. If not, change the paper.
Change the Paper Type settings in the print driver.
On the Paper/Output tab in the Printing Preferences of the print driver,
change the Paper Type setting.
Use the Printer Setting Utility to change the paper type to match
the paper.
Adjust the bias transfer roller. See Adjusting the Bias Transfer Roller on
page 52.
Adjust the fuser. See Adjusting the Fuser on page 52.
The printed output is foggy.
Clean the Developer. See Cleaning the Developer on page 53.
To Next Page
Loading...
