Paper and Media
Xerox
®
Phaser
®
3610 Black and White Printer 51
User Guide
3. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
4. Load the paper in the tray. Load hole punched paper with the holes to the left.
− For 1-sided printing, load letterhead or pre-printed face up with the top edge going into the
printer.
Note: Letterhead Duplex Mode allows 1-sided print jobs to be loaded in the same orientation as
2-sided print jobs. For details, see Enabling Letterhead Duplex Mode on page 76.
To Next Page
Loading...
