Xerox Phaser 3610

Maintenance
Xerox
®
Phaser
®
3610 Black and White Printer 99
User Guide
Moving the Printer
• Always turn off the printer and wait for the printer to shut down.
• Disconnect the power cord from the back of the printer.
• When lifting the printer, grasp the areas as shown.
• Keep the printer level to avoid toner spillage.
• Repack the printer and its options using the original packing material and boxes or a Xerox
Repackaging Kit.
CAUTION: Failure to repackage the printer properly for shipment can result in damage not covered
by the Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox
®
Warranty,
Service Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused by
improper moving.
CAUTION: The Xerox
®
Total Satisfaction Guarantee is available in the United States and Canada.
Coverage could vary outside these areas. Please contact your Xerox representative for details.