Xerox Phaser 5335 User Manual

1.3 Setting the Network Environment 9
 To Set the Subnet Mask/Gateway Address
16. Press the < > button until [Subnet Mask] is displayed.
17. Press the < > button to accept the selection.
The current subnet mask is displayed.
18. Enter the subnet mask in the same way you entered the IP address, and press the
<OK/Eject> button to confirm your entry.
19. Press the < > button to return to [Subnet Mask].
20. Press the < > button to display [Gateway Address].
21. Press the < > button to accept the selection.
The current gateway address is displayed.
22. Enter the gateway address in the same way you entered the IP address, and press
the <OK/Eject> button to confirm your entry.
23. The setting is now complete.
Reboot the printer by switching the power off and then on again.
24. Print the [Printer Settings] list to verify your settings.
TCP/IP
Subnet Mask
Subnet Mask
000.000.000.000*
Subnet Mask
255.255.255.000*
TCP/IP
Subnet Mask
TCP/IP
Gateway Address
Gateway Address
000.000.000.000*
Gateway Address
192.168.001.254*

Xerox Phaser 5335 Specifications

General

Brand	Xerox
Model	Phaser 5335
Category	Printer
Language	English