Front Panel Messages
Phaser® 5500 Laser Printer
4-70
Tray 4-5 Logic Board Failure An error was detected from the Tray 4-5 Unit Logic Board
NVRAM memory. Printing continues using other input
trays.
1. Turn power off, then on.
2. If error continues, call Service.
Tray 4-5 Logic Board Failure An error was detected in the Tray 4-5 Logic Board
communication. Printing continues using other input trays.
1. Tur n po we r o f f.
2. Verify Tray 4-5 wire harness is properly connected by
unplugging and reconnecting.
3. Tur n po we r o n .
4. If error continues, call Service.
Tray 6 Logic Board Failure An error was detected in the Tray 6 Logic Board
communication. Printing continues using other input trays.
1. Tur n po we r o f f.
2. Verify Tray 6 wire harness is properly connected by
unplugging and reconnecting.
3. Tur n po we r o n .
4. If error continues, call Service.
Tray 6 Logic Board Failure An error was detected from the Tray 6 Logic Board
NVRAM memory.
1. Turn power off, then on.
2. If error continues, call Service.
Wrong Paper Size
Load Tray [1 (MPT) | 2 | 3 | 4 | 5 | 6]
with [size*] [type*]
Replace the paper in the indicated tray with paper of the
indicated size and type.
Wrong Paper Type
Load Tray [1 (MPT) | 2 | 3 | 4 | 5 | 6]
with [size*] [type*]
Replace the paper in the indicated tray with paper of the
indicated size and type.
Error or Warning Messages (Continued)
Message Description
To Next Page
Loading...
