Phaser® 5500 Laser Printer
Copyright © 2004 Xerox Corporation. All Rights Reserved.
2-46
Transparencies
This topic includes:
■ "Guidelines for Transparencies" on page 2-46
■ "Printing Transparencies from Tray 1 (MPT) or Tray 6" on page 2-46
■ "Printing Transparencies from Trays 2-5" on page 2-47
Transparencies can be printed from any tray. They should be printed on one side only. To order
Xerox Transparencies, contact your local reseller.
Guidelines for Transparencies
■ Remove all paper before loading transparencies in the tray.
■ Do not load transparencies above the fill line; it may cause the printer to jam.
■ Handle transparencies by the edges using both hands to avoid fingerprints and creases
which can cause poor print quality.
■ Do not use transparencies with stripes on the side.
■ Change the paper type at the front panel for all trays.
■ Use Xerox Transparencies; print quality may vary with other transparencies.
For more information on paper types, weights, and sizes, go to Reference/Printing/Supported
Papers on the User Documentation CD-ROM.
Printing Transparencies from Tray 1 (MPT) or Tray 6
1. Fan the transparencies to release sheets that may stick together.
5500-170
To Next Page
Loading...
Need help?
General