Xerox Phaser 7800 System Administrator Guide

Network Configuration
Phaser 7800 Color Printer 23
System Administrator Guide
4. Under IP Address Resolution select an option from the drop-down list. Depending on the option you
select, some or all of the fields can be disabled.
 STATIC: This option disables dynamic addressing and allows you to type a static IP address.
Type the Machine IP Address, Subnet Mask, and Gateway Address.
 BOOTP: This option allows your DHCP server to assign an IP address to the printer. Dynamic
DNS Registration is enabled.
 DHCP: This option allows your DHCP server to assign an IP address to the printer. Dynamic DNS
Registration is enabled.
5. Select Enabled under Release Registration to send a release request to the DHCP and DNS servers. If
the servers grant the request, the current IP address and any dynamic DNS name are released when
the printer is turned off.
6. Under Zero-Configuration Networking, select Enabled under Self Assigned Address. This option
instructs the printer to assign itself an address if a DHCP server does not provide one.
7. Click Apply to save the new settings or Undo to retain the previous settings.
8. Click Default All to reset settings to default values. This option also disables FIPS 140 mode.
Configuring Settings for IPv6
IPv6 hosts can automatically configure themselves when connected to a routed IPv6 network using the
Internet Control Message Protocol Version 6 (ICMPv6). ICMPv6 performs error reporting for IP along with
other diagnostic functions. When first connected to a network, a host sends a link-local multicast router
solicitation request for configuration parameters. If suitably configured, routers respond to this request
with a router advertisement packet containing network-layer configuration parameters.
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click IP > IPv6.
3. Under Protocol, select Enabled to enable the protocol.
CAUTION: If both IPv4 and IPv6 are disabled, you cannot access CentreWare Internet Services. To
access IPv4 and IPv6 settings in CentreWare Internet Services, enable TCP/IP at the printer control
panel. If you disable TCP/IP or change the IP address, any dependent protocols are disabled and the
network controller restarts.
4. Under Stateless Addresses, enable Use Router Supplied Prefixes to allow the router to assign
address prefixes.
5. Under Default Dynamic Host Configuration Protocol (DHCP) Settings, select how DHCP operates for
IPv6. Options are:
 Use DHCP as directed by a router
 Always enable DHCP for address assignment and other configuration data
 Always enable DHCP for other configuration data only
 Never use DHCP

Xerox Phaser 7800 Specifications

General

Color	Yes
Duplex printing	No
Print technology	LED
Maximum resolution	1200 x 2400 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A3)	22 ppm
Print speed (black, normal quality, A4/US Letter)	45 ppm
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	225000 pages per month
Number of print cartridges	-
Page description languages	PCL 5c, PCL 6, PDF 1.6, PostScript 3
Total input capacity	3140 sheets
Total output capacity	- sheets
Maximum print size	297 x 420 mm
Paper tray media types	Photo paper, Plain paper
ISO A-series sizes (A0...A9)	A3, A4
Maximum ISO A-series paper size	A3
Security algorithms	HTTPS
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	1
Storage media	HDD
Internal memory	2048 MB
Processor frequency	133 MHz
Internal storage capacity	160 GB
Display	LCD
Control type	Touch
Certification	Certified to UL 60950-1/CSA 60950-1-07, 2nd Edition, EMC Directive 2004/108/EC, EN 55024, EN 60950-1, 2nd Edition, FCC Part 15, Class A, Low Voltage Directive 2006/95/EC, RoHS Directive 2002/95/EC
Product color	White
Display diagonal	4.3 \
AC input voltage	110 V
Power consumption (printing)	- W
Operating temperature (T-T)	50 - 90 °C
Operating relative humidity (H-H)	15 - 85 %

Weight and Dimensions

Depth	699 mm
Width	641 mm
Height	578 mm
Weight	81 g