Why do white areas or stripes appear on my Xerox Printer?
If white areas or stripes appear on your Xerox Printer, the paper may be damp; replace with paper from a new ream. Alternatively, the paper in use may be unsuitable; load suitable paper.
Why is the printing faint on the entire page from my Xerox PrimeLink B9110 Printer?
If the printing is faint on the entire page from your Xerox Printer, the print was made using Tray 5 (Bypass), and the size and type of the loaded paper differed from the setting on the print driver. Load paper of the correct size and type into Bypass, Tray 5. Fan the paper thoroughly before you load it. Alternatively, two or more sheets may be feeding at the same time; fan the paper thoroughly, then reset the paper.
Why does paper become wrinkled when using my Xerox PrimeLink B9110?
If paper becomes wrinkled when using your Xerox Printer, the paper in use may be unsuitable; replace with paper from a new ream.
How to fix Xerox PrimeLink B9110 when copies are not the correct size?
If your Xerox Printer isn't producing copies at the required size, consider these potential causes: The document scanning glass or the document cover might be dirty, so clean them. If the document is made of highly transparent material, place it on the document glass with a white sheet of paper on top. Ensure the document is loaded correctly and the document guides are properly positioned. If the document is folded or bent, straighten it before reloading. For non-standard sized documents, enter the document size on the control panel.
Why are documents jamming so often in my Xerox PrimeLink B9110 Printer?
Frequent document jams in your Xerox Printer can be caused by several issues. Make sure you're using the right type of paper or media and that it’s loaded properly in the document feeder. Remove any sticky labels, paper clips, or adhesive tape from the documents before copying. Ensure the document guides are correctly positioned. If a piece of paper is torn, open the document feeder cover and check for any remaining pieces. Also, if you're copying originals of different sizes, make sure the Mixed Size Originals setting is turned ON.
How to brighten the display on a Xerox PrimeLink B9110 Printer?
If the display on your Xerox Printer is dark, it could be due to a couple of reasons. The printer might be in power saver mode; press the Power Saver button on the control panel to cancel it. Alternatively, the brightness dial might be set too low; adjust it to increase the display brightness.
What does it mean when the Xerox Printer online indicator is lit, but copies are not delivered?
If the online indicator is lit on your Xerox Printer but copies are not being delivered, it's possible that data remains in the printer memory. Try canceling the current printing job or purging any remaining data.
General| Category | Printer |
|---|---|
| Print Technology | Laser |
| Print Resolution | 1200 x 2400 dpi |
| First-Print-Out Time, Printing | 4.5 seconds |
| Memory (Standard) | 8 GB |
| Hard Drive | 320 GB |
| Connectivity | USB, Ethernet, Wi-Fi |
| Scan Resolution | 600 x 600 dpi |
| Type | Multifunction |
| Paper Sizes | Letter, Legal, A4, A5 |
| PDL | PCL, PostScript, PDF |
| Network Connectivity | Ethernet, Wi-Fi |
| Operating System Compatibility | Windows, macOS, Linux |
Important safety instructions and guidelines for continued safe operation of your printer.
Guidelines for safe handling of electrical components and power cords to prevent shock or fire.
Safety guidelines for operating the printer, including handling moving parts and hot surfaces.
Information regarding laser safety standards and warnings for Class 1 Laser products.
Safety precautions related to the lithium battery used in the printer, including explosion risks.
Safety precautions for performing maintenance procedures and handling consumables.
Warnings and guidelines for handling ink, toner, and fuser fluid, and storing consumables.
Procedures for printing documents via a network using PostScript and PCL print drivers.
Covers the fundamental procedure for scanning documents, including loading and storing.
Details the tabs and options available for scan methods like Network Scanning and Email.
Steps for scanning a document and sending it as an email attachment.
Step-by-step guide to sending a fax using the multifunction printer's embedded fax feature.
Explanation of how to save and access frequently used features and job settings.
Step-by-step guide to saving feature settings and operations as a stored program.
Instructions for storing programs specifically for use with the Build Job feature.
Instructions on how to load and execute a stored program.
Allows verification of active, pending, and completed jobs, with options to cancel or print.
Provides access to device status information, including device information, faults, and supplies.
Procedures for cleaning the printer exterior, touch screen, document glass, and rollers.
Guides for checking supply status and replacing consumables like toner cartridges.
Table of common symptoms, checks, and remedies for printer issues.
Solutions for common image quality problems like dirty components or incorrect settings.
Guidance for resolving issues such as documents not feeding or incorrect copy size.
Solutions for problems encountered during printing, like inability to print or incorrect results.
Troubleshooting steps for issues like unable to scan or import scanned documents.
Instructions for clearing paper jams in various locations within the printer and feeders.
Solutions for issues related to sending and receiving faxes.
Explanation of fault messages, including illustrations and corrective actions.
Guidance for clearing paper jams within the High Capacity Feeder.
Guidance for troubleshooting paper skew and jam issues in the OHCF.
Guidance for clearing paper jams within the Interface Decurler Module.
Guidance for clearing paper jams that occur in the inserter module.
Guidance for clearing paper jams occurring in various areas of the High Capacity Stacker.
Guidance for clearing paper jams in the Crease and Two-Sided Trimmer.
Guidance for clearing paper jams that occur in the C/Z Folder.
Information on ordering and replacing finisher consumable supplies like staples and waste containers.
Guidance for clearing paper jams and resolving staple faults in the PR Finisher family.
Guidance for clearing paper jams and resolving fault codes for the SquareFold® Trimmer.
To Next Page