Xerox VersaLink B7025 User Manual

Xerox
®
Apps
108 Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
User Guide
Sending a Fax Manually
You can use the Manual Send feature to enable the fax modem speaker temporarily. This feature is
helpful to dial international numbers, or to use phone systems that require you to wait for a specific
audio tone.
To send a fax manually:
1. At the printer control panel, press the Home button, then touch Fax.
2. Adjust the fax settings as needed.
3. Touch Manual Send.
Note: To display the menu without entering a fax number, at the top of the screen, touch Fax.
4. Touch Dial, then enter a fax number using the touch screen keypad.
5. To send the fax, touch Scan.
6. If you are scanning from the document glass, when prompted, do one of the following:
− To complete the job and return to the Fax App, touch Done.
− To scan another page, load a new original document on the document glass, then touch
Add Page.
− To delete the scan and return to the Fax App, touch Cancel, then touch Delete.
Note: If you are scanning a document from the duplex automatic document feeder, a prompt does
not appear.
7. To return to the Home screen, press the Home button.

Xerox VersaLink B7025 Specifications

General

Brand	Xerox
Model	VersaLink B7025
Category	All in One Printer
Language	English