Xerox VersaLink B7025 User Manual

Troubleshooting
Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer 233
User Guide
Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms Solutions
Lines or streaks only present in copies made
from the document feeder.
There is debris on the CVT glass. When scanning, the paper from
the document feeder passes over the debris on the glass
surfaces, resulting in lines and streaks. Clean all glass surfaces
with a lint-free cloth dampened with water. For details, refer to
Cleaning the Scanner on page 177.
Spots present in copies taken from the
document glass.
There is debris on the document glass. When scanning, the
debris creates a spot on the image. Clean all glass surfaces with
a lint-free cloth dampened with water.
Image is too light or too dark.
Adjust the lighten/darken setting.
Image quality is poor when scanning color
original documents.
For best results, select Black & White output.
If the problem persists, for online support information, go to www.xerox.com/office/VLB70XXsupport.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android