EasyManuals Logo
Home>Xerox>All in One Printer>VersaLink B7025

Xerox VersaLink B7025 User Manual

Xerox VersaLink B7025
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
Getting Started
38 Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
User Guide
Connecting to a Computer Using USB
Windows 7, Windows 8.1, Windows Server 2008, Windows 10, Windows Server 2008 R2, and
Windows Server 2012.
Macintosh OS X version 10.9 and later.
UNIX and Linux: Your printer supports connection to various UNIX platforms through the network
interface.
To connect the printer to the computer using a USB cable:
1. Connect the B end of a standard A/B USB 2.0 or USB 3.0 cable to the USB Port on the back of the
printer.
2. Connect the A end of the USB cable to the USB port on the computer.
3. If the Windows Found New Hardware Wizard appears, cancel it.
4. Install the print driver.
For more information, refer to Installing the Software on page 47.
Connecting to a Wired Network
1. Ensure that the printer is powered off.
2. Attach a Category 5 or better Ethernet cable from the printer to the network or router socket. Us
e
an Ethernet switch or router, and two or more Ethernet cables. Connect the computer to the switch
or router with one cable, then connect the printer to the switch or router with the second cable.
Connect to any port on the switch or router except the uplink port.
3. Attach the power cord, then plug in the printer and turn it on.
4. Set the network IP printer address, or set up the printer for automatic printer IP detection. For more
information, refer to the System Administrator Guide at www.xerox.com/office/VLB70XXdocs.
Connecting to a Wireless Network
A wireless local area network (WLAN) provides the means to connect two or more devices in a LAN
without a physical connection. The printer can connect to a wireless LAN that includes a wireless router
or wireless access point. Before connecting the printer to a wireless network, the wireless router must be
configured with a service set identifier (SSID) and any necessary credentials.
Note: Wireless networking is available only on printers with the optional Wireless Network Adapter
installed.

Table of Contents

Other manuals for Xerox VersaLink B7025

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox VersaLink B7025 and is the answer not in the manual?

Xerox VersaLink B7025 Specifications

General IconGeneral
BrandXerox
ModelVersaLink B7025
CategoryAll in One Printer
LanguageEnglish

Related product manuals