Xerox VersaLink B7030 User Manual

Paper and Media
174 Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
User Guide
Loading Labels in Tray 6
1. Pull out Tray 6 from the high-capacity feeder until it stops. Open the side gate until it stops.
2. W
ait for the tray to lower and stop.
Note: Ensure that labels are the correct size for the tray. Do not load custom-size paper into Tray 6.
3. To load labels in the tray, insert labels face up with the top edge toward the back. Stack the labels
against the right side of the tray as shown.
N
ote: Do not load paper above the maximum fill line. Overfilling the tray can cause paper jams.
4. Close the tray door.
5. At the control panel, select the correct paper type and color. Ensure that the paper type is set to
L
abels.
Note: To change the paper settings when the tray is set to Dedicated mode, refer to Configuring
Tray Settings on page 149.
6. To confirm the settings, touch OK.
7. To return to the Home screen, press the Home button.

Xerox VersaLink B7030 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Speed	Up to 30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 kbps
Duplex Printing	Automatic
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria
Control Panel	7-inch color touchscreen
Memory	2 GB
Print Speed	30 ppm
Supported Media Sizes	A4, A5, A6, B5, B6, Letter, Legal, Executive
Connectivity	USB, Ethernet, Wi-Fi
Processor	1 GHz
Scan Speed	Up to 55 ipm