Maintenance
198 Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
User Guide
Moving the Printer
Before you move the printer:
• Ensure that you always power off the printer and wait for it to shut down completely.
• Ensure that no jobs are in the print queue.
• Disconnect the power cord and other cables from the back of the printer.
WA
RNING: To prevent electric shock, never touch the power plug with wet hands.
When removing the power cord, ensure that you pull the plug and not the cord. Pulling the
cord can damage it, which can lead to fire or electric shock.
Note:
• When moving the printer, do not tilt it more than 10 degrees in any direction. Tilting the printer
more than 10 degrees can cause toner spillage.
• When moving the printer over a long distance, remove the drum cartridge and toner cartridges
to prevent toner from spilling. Pack the printer inside a box.
C
AUTION: Do not expose the drum cartridge to direct sunlight or strong indoor
fluorescent lighting. Do not touch or scratch the surface of the drum.
C
AUTION: Failure to repackage the printer properly for shipment can result in damage
not covered by the Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee.
The Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover
damage to the printer caused by improper moving.
After moving the printer:
1. Reinstall any parts that you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and power on the printer.
To Next Page
Loading...
Need help?
General
