Xerox VersaLink B7030 User Manual

Troubleshooting
Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer 233
User Guide
Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms Solutions
Lines or streaks only present in copies made
from the document feeder.
There is debris on the CVT glass. When scanning, the paper from
the document feeder passes over the debris on the glass
surfaces, resulting in lines and streaks. Clean all glass surfaces
with a lint-free cloth dampened with water. For details, refer to
Cleaning the Scanner on page 177.
Spots present in copies taken from the
document glass.
There is debris on the document glass. When scanning, the
debris creates a spot on the image. Clean all glass surfaces with
a lint-free cloth dampened with water.
Image is too light or too dark.
Adjust the lighten/darken setting.
Image quality is poor when scanning color
original documents.
For best results, select Black & White output.
If the problem persists, for online support information, go to www.xerox.com/office/VLB70XXsupport.

Xerox VersaLink B7030 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Speed	Up to 30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 kbps
Duplex Printing	Automatic
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria
Control Panel	7-inch color touchscreen
Memory	2 GB
Print Speed	30 ppm
Supported Media Sizes	A4, A5, A6, B5, B6, Letter, Legal, Executive
Connectivity	USB, Ethernet, Wi-Fi
Processor	1 GHz
Scan Speed	Up to 55 ipm