Name: Xerox VersaLink B7125
Brand: Xerox
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Symptom

Solutions

Envelopes are wrinkled or creased when printed. Check if the crease is within 30 mm (1.2 in.) of the

four edges of the envelope.

• If yes, it is printing as expected. Your printer is not

faulty.

• If not, take the following actions:

Ensure that envelopes are loaded properly in the

bypass tray. For details, see Loading Envelopes in

the Bypass Tray.

Follow the guidelines for printing on envelopes.

For details, see Guidelines for Printing Envelopes.

If the problem persists, use a different size

envelope.

The top margin is incorrect.

• Ensure that the paper is loaded properly.

• Ensure that the margins are set correctly in the

application you are using.

• Adjust the paper registration. For details, see

Adjusting Paper Registration.

The printed surface of the paper is bumpy.

1 Print a solid image over the entire surface of one

sheet of paper.

2 Load the printed sheet into the tray with the

printed side face down.

3 Print five blank pages to remove debris from the

fuser rollers.

CCooppyy aanndd SSccaann PPrroobblleemmss

If the copy or scan quality is poor, refer to the following table.

If the problem persists, for online support information, go to www.xerox.com/office/VLB71XXsupport.

229

Other manuals for Xerox VersaLink B7125

Questions and Answers:

Need help?

Do you have a question about the Xerox VersaLink B7125 and is the answer not in the manual?

General