Xerox VersaLink C405dn User Manual

PPeerrffoorrmmiinngg tthhee SSccaann CCoolloorr CCoonnssiisstteennccyy PPrroocceedduurree
1. At the printer control panel, press the Home button.
2. Touch Device→Support→Color Scan Consistency.
3. To select the desired procedure, touch Calibration Type, then select your procedure.
• To perform the Scan Color Consistency procedure, touch Print Calibration Chart. Follow the
onscreen instructions.
• To restore your color scan settings to the previous settings, touch Restore Previous Settings.
Follow the onscreen instructions.
• To reset your color scan settings to factory-default values, touch Reset to Factory Defaults.
Follow the onscreen instructions.
4. When finished, touch Close.
5. To exit the menu, touch X.
6. When finished, to return to the Home screen, press the Home button.
AAddjjuussttiinngg PPaappeerr RReeggiissttrraattiioonn
Use Adjust Paper Registration to adjust the placement of the printed image on the page. The
adjustment allows you to place the top, bottom, left, and right margins exactly where you want. You
can specify the image position on both the front and back sides of the paper, for each installed paper
tray.
VVeerriiffyyiinngg PPaappeerr RReeggiissttrraattiioonn
1. At the printer control panel, press the Home button.
2. Log in as administrator. For details, refer to the System Administrator Guide at www.xerox.com/
office/VLC405docs.
3. Touch Device→Support→Image Position.
4. Select the source paper tray for the registration print.
a. Touch Paper Supply.
b. Touch the desired tray.
5. If your printer has automatic 2-sided printing, select the sides that you want to optimize.
• To select a sample registration page for adjusting side 1, touch Adjusted Side, then touch
Side 1.
• To select a sample registration page for adjusting both sides, touch Adjusted Side, then touch
Side 2.
6. Specify the consecutive number of sample pages to print.
a. Touch Print Settings.
b. To increase or decrease the number of sample pages, for Quantity, touch Plus (+) or Minus (-),
then touch OK.
7. To print the sample pages, touch Print Sample.
8. When printing is completed, touch Close.
Xerox
®
VersaLink
®
C405 Color Multifunction Printer
User Guide
185
Maintenance

Xerox VersaLink C405dn Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Copy Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Duplex Printing	Automatic
Processor	1.05 GHz
Memory	2 GB
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Standard Paper Capacity	550 sheets
Output Capacity	250 sheets
Monthly Duty Cycle	Up to 85, 000 pages
Display	5-inch color touchscreen
Print Speed	Up to 36 ppm
Scan Resolution	Up to 600 x 600 dpi
Connectivity	Ethernet, USB, Wi-Fi, Wi-Fi Direct
Maximum Paper Capacity	1250 sheets
Paper Sizes	A4, A5, A6, B5, Legal, Letter, Executive, Folio, Statement