Xerox VersaLink C405dn User Manual

Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms
Solutions
Lines or streaks only present in copies made
from the document feeder.
There is debris on the CVT glass or the second-side scanning
lens assembly. When scanning, the paper from the document
feeder passes over the debris on the glass surfaces, resulting in
lines and streaks. Clean all glass surfaces with a lint-free cloth.
For more information, refer to Cleaning the Scanner.
Spots present in copies made from the
document glass.
There is debris on the document glass. When scanning, the
debris creates a spot on the image. Clean all glass surfaces
with a lint-free cloth.
Image is too light or too dark. Adjust the lighten/darken setting.
Colors are inaccurate. Adjust color settings and confirm that the correct Original
Type is set.
Perform the Scan Color Consistency procedure. For more
information, refer to Color Registration.
If the problem persists, for online support information, go to www.xerox.com/office/VLC405support.
Xerox
®
VersaLink
®
C405 Color Multifunction Printer
User Guide
223
Troubleshooting

Xerox VersaLink C405dn Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Copy Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Duplex Printing	Automatic
Processor	1.05 GHz
Memory	2 GB
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Standard Paper Capacity	550 sheets
Output Capacity	250 sheets
Monthly Duty Cycle	Up to 85, 000 pages
Display	5-inch color touchscreen
Print Speed	Up to 36 ppm
Scan Resolution	Up to 600 x 600 dpi
Connectivity	Ethernet, USB, Wi-Fi, Wi-Fi Direct
Maximum Paper Capacity	1250 sheets
Paper Sizes	A4, A5, A6, B5, Legal, Letter, Executive, Folio, Statement