Xerox VersaLink C405dn

3. Remove the paper from the paper tray.
Keep the paper wrapped and away from humidity and dirt.
4. Lift and carry the printer as shown in the illustration.
Note:
• When moving the printer, do not tilt it more than 10 degrees in any direction. Tilting
the printer more than 10 degrees can cause toner spillage.
• When moving the printer over a long distance, remove the drum cartridge and toner
cartridges to prevent toner from spilling.
Caution: Failure to repackage the printer properly for shipment can result in
damage not covered by the Xerox
®
Warranty, Service Agreement, or Total
Satisfaction Guarantee. The Xerox
®
Warranty, Service Agreement, or Total
Satisfaction Guarantee do not cover damage to the printer caused by
improper moving.
After moving the printer:
1. Reinstall any parts that you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and power on the printer.
Xerox
®
VersaLink
®
C405 Color Multifunction Printer
User Guide
193
Maintenance