6. To open the staple cartridge clamp, pull the clamp in the direction shown.
7. Remove the jammed staples, then push the clamp in the direction shown until the clamp clicks into the locked
position.
WWaarrnniinngg:: The points of the jammed staples are sharp. Remove the jammed staples carefully.
8. Grasp the orange handle, then insert the cartridge into the stapler assembly until the cartridge clicks into place.
9. Close the finisher front door.
Clearing Booklet Staple Jams in the Office Finisher
CCaauuttiioonn:: Do not perform this procedure while the printer is printing.
Xerox
®
VersaLink
®
C71XX Series Color Multifunction Printer User Guide 247
Troubleshooting