3. Connect the printer to your computer with a USB cable or to the network with an Ethernet cable.
4. Power on the printer:
a. Open the front door, then press the power switch to the On position.
b. At the printer control panel, press the PPoowweerr//WWaakkee button.
If the printer was installed previously in a wireless network environment, it could retain setup and configuration
information from that environment. To prevent the printer from attempting to connect to the previous network,
reset the wireless settings. For more information, refer to the System Administrator Guide at www.xerox.com/
office/VLC71XXdocs.
Xerox
®
VersaLink
®
C71XX Series Color Multifunction Printer User Guide 47
Getting Started
To Next Page
Loading...
Need help?
General