G
ETTING
S
TARTED
1.16
Installing Xerox Software
N
OTES
:
• Cancel the “New Hardware Found” window when your computer
boots up.
• Make sure that your machine is turned on and connected to your
computer’s parallel port or USB port
before installing
software
. Windows NT 4.0 do not support the USB connection.
1
Insert the supplied Driver CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click
Start
and
then
Run
. Type
X:Xinstall.exe
, replacing “
X
” with the
letter of your drive and click
OK
.
2
When the language selection window appears, select the
appropriate language and then click
Continue
.
3
Choose the installation driver and then click
Continue
.
To Next Page
Loading...
